Long-Range VTOL Platform

Long-Range Monitoring Station

Tilt-rotor VTOL drone with 107-minute endurance and 30 km range, paired with an autonomous nest station featuring automatic battery swap for continuous BVLOS infrastructure monitoring.

107min
Flight Time
30km
Transmission
30m/s
Max Speed
6000m
Service Ceiling
6
Auto Battery Swap
────────
VTOL Tilt-Rotor Aircraft

Fixed-Wing Efficiency. Multi-Rotor Precision.

A tilt-rotor VTOL that launches vertically, transitions to efficient fixed-wing cruise at 17–30 m/s, and lands vertically back in the nest — no runway required. 107 minutes of flight time covers vast infrastructure corridors in a single sortie.

Aircraft Capabilities

  • 7.5 kg standard weight • 9.0 kg max takeoff weight
  • 1.5 kg gimbal payload • DG-L20T full sensor suite
  • Multi-rotor hover: 0–17 m/s • Fixed-wing cruise: 17–30 m/s
  • 6000 m service ceiling • Wind resistance up to 12 m/s
  • Quad-GNSS: GPS + Galileo + BeiDou + GLONASS
  • RTK positioning: 1 cm + 1 ppm horizontal accuracy
  • ADS-B receiver (1090ES) for airspace awareness
  • Operating temperature: −20°C to 50°C
VTOL tilt-rotor drone in fixed-wing flight mode for long-range infrastructure monitoring
────────
Dual Flight Modes

Two Modes. One Seamless Transition.

The aircraft automatically transitions between multi-rotor and fixed-wing modes during flight, combining vertical takeoff precision with long-range cruise efficiency.

🚁

Multi-Rotor Mode

Vertical takeoff, hover, and precision landing. Speed range 0–17 m/s. Ascent 4 m/s, descent 3 m/s. Used for takeoff from nest, hovering inspections, and precision landing on the nest pad.

Hover • Inspect • Land
✈️

Fixed-Wing Mode

Efficient cruise at 17–30 m/s for maximum range and endurance. Ascent/descent 5 m/s. Tilt-rotor transition is automatic. Covers long corridors — pipelines, power lines, railways.

Cruise • Range • 107 min
🔄

Auto Transition

Seamless switch between modes at cruise speed threshold. Aircraft pitches forward, wingtips tilt, and fixed-wing flight begins. Reverse transition for approach and landing. Fully autonomous.

No Pilot Input Required
────────
Interchangeable Gimbal Payloads

Quick-Detach E-Type Gimbal Mount

The DG-L20T full sensor suite comes standard with the nest station aircraft. The DG-L50T extended-range gimbal is available with the VTOL Pro upgrade.

DG-L20T — Full Sensor Suite

The complete package: 20x optical zoom + 12 MP wide-angle + 640×512 thermal + laser rangefinder. Every sensor in one gimbal for missions that require both detailed visual identification and thermal analysis.

Weight810 g
Zoom Camera8 MP • 20x optical • 240x hybrid • 4K video
Wide-Angle12 MP • 1/2" CMOS • 4K video
Термално640×512 VOx • ≤50 mK NETD
Laser Rangefinder10–1200 m • ±1 m accuracy
Temp Range−20°C to +550°C
DG-L20T full sensor gimbal with zoom thermal and laser for VTOL drone

DG-L50T — Extended-Range Sensor Suite PRO ONLY

Available exclusively with the VTOL Pro platform (16.8 kg, 179-min flight time, 19 kg MTOW). Extended-range zoom and enhanced thermal capabilities for large-scale infrastructure corridors requiring maximum detection distance.

Supported AircraftVTOL Pro only (2.2 kg payload capacity)
CapabilitiesExtended zoom + wide-angle + thermal + laser rangefinder
Pro Flight Time179 min (vs 107 min Standard)
Pro MTOW19 kg

Contact us for VTOL Pro platform specifications and availability.

DG-L20T extended range gimbal available with VTOL Pro drone platform
────────
Autonomous Nest Station

Industrial-Grade. Fully Autonomous.

A 590 kg stainless steel nest that launches, recovers, recharges, and redeploys your aircraft autonomously. Automatic battery swap with 6 onboard batteries enables continuous 24/7 operations. Built for extreme environments from −35°C to 50°C.

Nest Capabilities

  • Automatic battery swap — 6 battery slots, zero manual intervention
  • RTK + visual recognition precision landing
  • Weather monitoring: wind, rain, temperature, humidity
  • Climate-controlled cabin: −35°C to 50°C operating range
  • IP54 protection • 304 stainless steel + aluminum alloy
  • 40 kA surge protection • UPS backup power
  • 17 km image transmission to Command Center
  • Connectivity: Ethernet, 4G, 5G, fiber optic (custom)
  • Interior + exterior surveillance cameras
Autonomous drone nest station for long-range VTOL operations with automatic battery swap
────────
Nest Technical Specifications

Built for Permanent Deployment

Dimensions (closed)2185 × 2691 × 1500 mm
Dimensions (w/ weather station)2185 × 2691 × 3880 mm
Weight≤590 kg
Material304 Stainless Steel • Aluminum Alloy • Composite
ProtectionIP54
Operating Temperature−35°C to 50°C • <95% RH
Power SupplyAC 220V 50Hz (110V with transformer)
Operating Power≤300W standard • 2200W peak
Surge Protection40 kA
Electrical SafetyOverload + leakage (30 mA)
Landing SystemRTK + Visual QR Recognition
Battery Management6 slots • Automatic swap
Door TypeSide door (motorized)
Image Transmission17 km direct
CommunicationEthernet • 4G • 5G • Fiber (custom)
MonitoringInterior + exterior cameras • Weather station
────────
Complete System

What’s Included in the Station

Everything needed for fully autonomous long-range BVLOS operations. Deploy once, operate continuously.

✈️

VTOL Aircraft

Tilt-rotor fixed-wing with 107-min endurance, 30 m/s max speed, quad-GNSS, RTK, ADS-B, and interchangeable gimbal mount. 9.0 kg MTOW.

107 min • 30 km
🏠

Nest Station

590 kg industrial nest with automatic battery swap, climate control, weather monitoring, RTK landing, IP54 protection, and surge protection.

6 Battery Slots • IP54
📷

Gimbal Payload

DG-L20T full sensor suite included: 20x optical zoom + 12 MP wide-angle + 640×512 thermal + laser rangefinder. DG-L50T available with Pro upgrade.

DG-L20T Included
🔋

Smart Batteries

LiPo 6S 12,000 mAh batteries (277.2 Wh each). 6 total — 2 in aircraft, 4 in nest charging. Automatic swap between missions.

12,000 mAh • 277.2 Wh
💻

Command Center

Cloud-based flight management platform. Schedule missions, view live video, manage fleets, control gimbals, and access analytics from any browser.

Learn More →
📡

Repeater Base Stations

Deploy along route for extended-range BVLOS. Extends 30 km transmission to cover entire pipeline and power line corridors. Daisy-chain multiple units.

Extend Range
────────
Frequently Asked Questions

Common Questions

A tilt-rotor VTOL (Vertical Takeoff and Landing) fixed-wing drone. It transitions between multi-rotor hover mode (0–17 m/s) and fixed-wing cruise mode (17–30 m/s). No runway needed — it launches and lands vertically from the nest station.
Up to 107 minutes maximum flight time with the 12,000 mAh LiPo 6S battery (277.2 Wh). The nest holds 6 batteries with automatic swap for continuous operations.
30 km image transmission (FCC) with the base station. The nest provides 17 km direct. Repeater base stations can be deployed along routes for extended BVLOS coverage.
The DG-L20T comes standard: 20x optical zoom + 12 MP wide-angle + 640×512 thermal + laser rangefinder (10–1200 m). All in one gimbal, quick-detach E-type mount, 4K video. The DG-L50T extended-range gimbal is available with the VTOL Pro platform upgrade.
The nest operates from −35°C to 50°C with internal climate control (air conditioning + heater). IP54 rated. The built-in weather station automatically delays missions during unsafe conditions.
The nest holds 6 smart batteries (2 in aircraft, 4 charging in nest slots). After landing, a robotic arm removes spent batteries and inserts charged ones. The process is fully automated through the Command Center with zero manual intervention.
Pipeline monitoring (oil, gas, water), power line and transmission corridor inspection, solar and wind farm surveillance, railway infrastructure, mining, forestry, and any application requiring long-range BVLOS autonomous drone operations.
Deploy Long-Range Intelligence

Ready to Monitor Infrastructure at Scale?

Tell us about your corridor, infrastructure, or site. We’ll design a deployment plan with flight routes, repeater placement, and sensor configuration.